Protect the paint you want to keep

XPEL Paint Protection Film in Dubai

Less worry about the next stone chip.

Protect the paint you want to keep. XPEL paint protection film adds a replaceable protective layer that helps reduce damage from road debris and light surface wear.

Compare clear gloss ULTIMATE PLUS with satin STEALTH. Then choose front-end, selected-panel or full exterior coverage with our Al Quoz team.

Call 050 233 7180 Get an XPEL quote

Start with your car model and preferred coverage. Film availability, preparation, timing and the VAT-inclusive total are checked for your installation.

Clear protection film being positioned over a red car hood — Film follows the panel beneath it. Preparation and edge finishing matter as much as coverage.

Choose the finish first

Compare XPEL ULTIMATE PLUS and STEALTH

Start with the finish you want, then choose the covered panels. Clear gloss and satin film serve different appearance goals. A physical sample on your paint color is more useful than a screen when judging sheen.

Clear gloss protection

XPEL ULTIMATE PLUS

For drivers who want to keep a glossy paint finish visible beneath a clear protective layer.

Best fit: Gloss paint and owners prioritizing the original look.
Surface marks: The self-healing top layer can recover from fine scratches. Deep cuts and damaged paint don’t self-heal.
Finish match: A clear gloss finish keeps the paint color visible. Surface texture and installation quality still affect the final appearance.
Warranty: XPEL publishes a 10-year limited product warranty, subject to eligibility and terms.
Product choice: The precise ULTIMATE PLUS variant belongs on the quote. Availability and applicable UAE warranty terms depend on the supplied product.

Satin protection

XPEL STEALTH

For a softer sheen on gloss paint, or protection that complements an existing matte or satin finish.

Best fit: Owners who want satin reflections while keeping the underlying color visible.
Surface marks: Fine surface scratches can self-heal. Cuts, chips through the film and damage underneath require assessment.
Finish match: Partial coverage on gloss paint creates a sheen difference. A sample helps judge the match on factory matte or satin paint.
Warranty: XPEL publishes a 10-year limited product warranty, subject to eligibility and terms.
Product choice: Local supply and warranty eligibility are checked for the selected film. Care products must preserve its satin finish.

Compare the same panels

XPEL PPF coverage and quote options

Your fitted price depends on the car, film, covered panels and preparation. Get a written quote in AED with the VAT-inclusive total. Choose the coverage below to start. A single bumper and a complete front end involve different amounts of film and fitting work.

Coverage options to price for your car
Coverage	Panels to include in your quote	Useful for	Quote
Selected panels	One named bumper, hood, pair of mirror caps or another agreed painted area. Full-panel coverage and partial strips should be distinguished.	Targeting exposed areas within a smaller budget.	Quoted per agreed areaFilm, quantity and fitting itemized.
Full front end	Full hood, front bumper, front fenders and mirror caps, individually listed. Headlights need a separate product and inclusion decision.	Frequent road travel where front-facing surfaces are the priority.	Vehicle-specific quoteCompare whole panels with partial strips.
Full exterior	A panel-by-panel list of the painted exterior, including the roof treatment, bumpers and mirrors. Door shuts, trim, glass and wheels are separate.	Broader protection or a consistent STEALTH finish.	Vehicle-specific quotePreparation and optional extras identified.

A written quotation sets the payable total for your car. Existing film removal, paint correction and optional coatings should be separate items when needed.

What changes the total?

Vehicle size, curved bumpers and complex recesses
Film range, finish and the exact covered area
Existing film removal or adhesive cleanup
Paint correction, repairs and agreed trim removal

Get a quote you can compare

Tell us your car model and whether you prefer gloss or satin. Photos, the year and details of any resprayed panels can help with the follow-up assessment, but you don’t need them to start an inquiry.

Compare preparation, the exact film, fitting, extras and VAT together. Keep the proposed collection date, applicable product warranty and any separate workmanship cover with the quotation.

Put protection where it helps

Choose coverage around your driving

The best coverage is the coverage that suits your paint, priorities and budget. Start with the areas you want protected. You can discuss a smaller installation without committing to a full exterior package.

Highway trips and daily commuting

Forward-facing painted panels are a practical starting point when road debris is your main concern. A complete front-end quote should identify the bumper, hood, both front fenders and mirror caps. A narrow hood strip leaves a visible boundary and protects less paint than a full hood.

Consider where the car actually picks up damage. Lower side panels may deserve attention on some vehicles, while the roof treatment depends on whether the surface is painted or glass. Glass requires its own suitable product.

Parking and everyday contact

Door edges, handle recesses and loading areas can face repeated contact. Selected-area film can target those concerns without covering every panel. The quote needs the number of pieces and their exact positions because a pair of mirror caps is a different job from one complete bumper.

Film helps with surface wear. It cannot stop a door dent, restore missing paint or guarantee that an impact leaves no mark underneath.

A consistent satin appearance

STEALTH changes the way light reflects from the paint. Covering selected gloss panels can leave a noticeable contrast with the rest of the car. A full painted exterior is worth comparing when a consistent satin appearance is the main goal.

Factory matte and satin finishes also vary. Match the proposed film to the actual paint before choosing the coverage. Mirror housings, painted roof sections and complex trim areas should be considered individually.

Keeping a car for longer

Full exterior coverage protects more painted surfaces, but its value depends on the existing paint and how you plan to use the car. Compare the fitted total with a front-end installation and the cost of maintaining or replacing damaged sections later.

The warranty period is not a promise that film will look unchanged for that entire time. Care, exposure and physical damage still matter. No package guarantees a future resale price.

A different film for a different job

Temporary protection and textured XPEL film

Planning one trip or choosing a textured finish? These products serve different purposes from everyday clear gloss or satin PPF.

Temporary clear protectionUp to one week

TRACWRAP

Protect for the trip.
Remove after the event.

Choose it for: A road trip or track event where short-term surface protection is the aim.
Plan for: Removal after use. XPEL says it can remain on the vehicle for up to one week and should then be removed promptly.
Check first: Surface suitability and local supply. A long-term ULTIMATE PLUS warranty should not be assumed.

Read the TRACWRAP use instructions

Specialist textured protectionTextured finish

ARMOR

Choose the texture.
Match it to the application.

Choose it for: A visibly textured protective finish with a different appearance from clear gloss PPF.
Plan for: Product-specific coverage. XPEL lists a limited warranty of 4 years on vertical surfaces and 2 years on non-vertical surfaces.
Check first: Local supply, surface suitability and application eligibility. ARMOR and EXO ARMOR are separate products.

Read the product warranty terms

Want everyday gloss or satin protection? Start with ULTIMATE PLUS or STEALTH. Discuss specialist films separately so the product, price and aftercare match the job.

Compare the everyday options

Film fitting on a curved panel. The quotation identifies the product used for your installation.

Plan the finish before fitting

From paint inspection to handover

Check the paint underneath
Tell us about repainting, chips, peeling clear coat or old film. PPF follows the surface. It won’t repair existing defects. Discuss paint correction where appropriate.
Agree the film and edges
Choose the product, panel list and finish with the team. Edge wrapping, possible seams and any trim removal depend on the vehicle and the agreed work. A visible edge isn’t automatically a fault.
Prepare and fit
Cleaning and surface preparation come before fitting. Curved bumpers, recesses and larger areas take different amounts of work. Fitting time, settling time and the collection date are agreed for your car.
Inspect the finished panels
Review panel coverage, edges and finish with the team. Keep the invoice and product details. Report lifting edges, trapped debris or a persistent appearance concern so the cause can be assessed.

Better preparation for a better finish

Paint condition and the right preparation

Clear film leaves the surface beneath it visible. Choose preparation around your car’s condition, without automatically adding the same polishing package to every installation.

New car

Check before polishing

A new car can still have contamination or marks from transport and washing. Inspect the surface before deciding whether correction is worthwhile. New paint is neither a reason to skip preparation nor an automatic reason to polish every panel.

Your benefit Preparation addresses visible problems, with any correction separately agreed.

Repainted panels

Confirm the paint is ready

Recently repaired areas need advice from the refinisher about curing and suitability for adhesive film. There is no single waiting period for every paint system. Paint and clear-coat condition also matter when the film is eventually removed.

Your benefit The installation plan accounts for the repair history before adhesive film is applied.

Chips and deeper marks

Resolve defects underneath

Stone chips, peeling clear coat and deeper scratches need assessment before fitting. PPF follows the panel and does not rebuild missing paint. Agree on any repair or correction first so the likely finish and additional cost are clear.

Your benefit You know which marks may remain visible through the finished film.

Existing PPF

Allow for removal and cleanup

Removing old film can reveal adhesive residue, earlier repairs or uneven paint condition. A photograph cannot always establish the cleanup needed. Keep removal and preparation separate from the new film price when comparing quotations.

Your benefit The quote distinguishes replacing the film from restoring the surface beneath it.

Before fitting

Agree on edges and seams

Panel shape and access determine where film can wrap around an edge and where a cut line or seam is needed. Discuss tight corners, badges, recesses, parking sensors and any trim removal before fitting. A completely invisible finish should not be assumed.

At collection

Review the result together

Compare coverage with the written panel list in suitable lighting. Keep the invoice, product details and care instructions. Persistent haze, trapped debris or lifting edges need an installer assessment. Avoid pressing, cutting or pulling the film yourself.

Know what protects your purchase

Product warranty and installation support

Understand the film warranty and the installer support separately. The supplied product, installation eligibility and applicable UAE terms determine your cover.

Manufacturer product warranty

Manufacturing defects

XPEL’s limited warranty for ULTIMATE PLUS and STEALTH addresses defects such as

Yellowing
Cracking
Blistering
Delamination

Subject to the applicable product terms, installation eligibility and proof of installation.

Damage and everyday wear

Protection has limits

A product warranty is not insurance against

Stone impacts
Scratches
Water spots
Accidents

Physical damage may require a panel assessment and film replacement at additional cost.

Keep with your invoice

Your installation record

XPEL requires proof of installation from an authorized installer for claims. Training, product supply and manufacturer authorization are separate matters.

Product and coverageExact film and covered panels on the invoice
Authorization and eligibilityInstaller documentation and applicable UAE registration process
Workmanship and supportSeparate installation terms and the contact for a claim

Keep the surface and edges in good condition

Aftercare for gloss and satin PPF

Allow time before washing

XPEL advises waiting 48 hours after installing ULTIMATE PLUS or STEALTH before washing. Follow any longer settling instructions supplied for your installation.

Keep pressure away from edges

Don’t direct a pressure-washer jet at film edges. Remove insects, bird residue and other contamination promptly using the recommended film-care method.

Use care products for the finish

Choose products intended for the specific film. Satin care should preserve the sheen. XPEL recommends its Ceramic Boost at least every six months for ULTIMATE PLUS and STEALTH. Follow the current product instructions and keep any additional coating compatible with the film warranty.

Have damage assessed

A damaged section may need replacement. Don’t pull at lifting film or attempt aggressive DIY removal. XPEL recommends professional removal. Keep the original product details so a replacement can be assessed against the surrounding film.

Manufacturer information
XPEL product warranty terms XPEL film care instructions XPEL STEALTH product details

Before you book

Questions about XPEL PPF

Wrapping.ae is operated by AMF Auto Services LLC in Al Quoz, Dubai. Call to discuss the car and arrange a visit.

Still comparing materials? Our paint protection film service explains the broader coverage choices.

What does an XPEL PPF quote include?

The written quote should identify the exact film, finish, covered panels, preparation and fitting. Any old-film removal, paint correction or coating should be separately described, with the total in AED and VAT treatment made clear.

Does the warranty cover stone chips?

The published product warranty addresses specified manufacturing defects. Impact damage, scratches and damage to the paint are different concerns. The applicable product terms and installation eligibility determine any claim.

When can I wash the car?

XPEL advises waiting 48 hours after ULTIMATE PLUS or STEALTH installation before washing. Follow any longer installation-specific settling guidance and keep pressure-washer jets away from film edges.

Is full-body XPEL PPF worth it?

It depends on the paint condition, how you use the car and your budget. Full exterior coverage protects more painted areas. Front-end protection concentrates spending on exposed forward-facing panels. Compare both written quotes before choosing.

Will STEALTH change my paint color?

The underlying color stays visible, but the satin finish changes how light reflects. That can change the apparent depth and shade. Compare a physical sample, especially when matching existing matte paint.

Can PPF hide existing scratches and chips?

Don’t plan on film to conceal damage. Chips and deeper defects remain underneath. Inspect the paint first and agree any correction or repair before installation.

How long will installation take?

The covered area, paint preparation, old-film removal and vehicle shape affect the schedule. A fitting estimate and collection date are agreed with your quotation. A full exterior installation involves more preparation and finishing than one selected panel.

Is ULTIMATE PLUS the same as ULTIMATE FUSION?

No. They are different products. XPEL describes ULTIMATE FUSION as adding hydrophobic properties. Don’t assume a ULTIMATE PLUS quote includes that product or a ceramic coating.

Can one damaged panel be replaced?

A damaged panel can be assessed separately. Replacement depends on the paint underneath, the existing product and current availability. Older surrounding film may look different from a new section, so the finish should be checked before fitting.

Your car, your coverage

Get the right XPEL quote for your car

Tell us your car model and the protection you have in mind. We’ll discuss the finish and coverage, then help you arrange the next step with our Al Quoz team.

Call the workshop Send details on WhatsApp